Placeholder

Welded High Strength Steel Structures

€140.00

€10 p&p UK / €20 p&p Worldwide

Results of a 5 year Nordic Research Programme, NESCO 1, based on testing Editor: A. F. Blom.
ISBN 0 947817 95 6 (1997), 550 pages

SKU: ISBN 0 947817 95 6

Proceedings of the First North European Engineering and Science
Conference (NESCO I) Subtitled “Welded High Strength Steel Structures”
held in Stockholm, Sweden, 8-9 October 1997

WELDING PROCESSES

High Productive MAG Welding – An evaluation of Rapid ArcTM and
RapidTM and Rapid MeltTM
J HEDEGÅRD, K WEMAN, M LUNDIN

High Productive MAG Welding – A Comparison of Methods
M LUNDIN, J HEDEGÅRD, K WEMAN

High Productive MAG Welding – Fatigue Properties of Weldments
M LUNDIN, L LOPEZ MARTINEZ, J HEDEGÅRD, K WEMAN

High Productive MAG Welding of Vehicle Components
K WEHMAN, M LUNDIN, J HEDEGÅRD

High Productive MAG Welding – Examples of Industrial Applications
with Rapid ArcTM Welding
M LUNDIN, J TANI, J RIDENFELDT

High Productive MAG Welding – Weld Toe Defects – A New Detection
Method
I HOLST, M LUNDIN J HEDEGÅRD, K WEMAN

Fatigue Testing of Electron, Laser and MAG-Welded Transmission Components

A TJERNBERG, K ERIKSSON, H TORSTENSSON, D HOLM

DESIGN, ANALYSIS AND TESTING

On the Evolution of Multiaxial Fatigue Damage Parameters
A SILJANDER

Multiaxial Fatigue Damage Parameters for Welded Joints: Design Code
and Critical Plane Approaches
G B MARQUIS, M BÄCKSTRÖM, A SILJANDER

High Strength Welded Box Beams Subjected to Torsion and Bending
– Test Results and Proposed Design Criteria for Torsion/Bending
Interaction
T DAHLE, K E OLSSON, B JONSSON

Multiaxial Fatigue Experiments of Square Hollow Section Tube-to-Plate
Welded Joints
M BÄCKSTRÖM, A SILJANDER, R KUITUNEN, R ILVONEN

High Strength Welded Box Beams Subjected to Torsion and Bending
Fatigue Loads – Mode I and III Stress Intensity Factors and Crack
Growth Predictions
K E OLSSON, D HOLM, F JAKOPOVIC

High Strength Welded Box Beams Subjected to Torsion and Bending
Fatigue Loads – Optimum Weld Design Considering Welding Cost and
Fatigue Induced Field Failure Cost
K E OLSSON

On Design of Cylinder Attachments on Box Frame Structures
P JUUJÄRVI, D HOLM, J SAMUELSSON, J KUOPPA

On the Evaluation of Hot Spot Stresses Using FEM
M J LEHTONEN

Round Robin Test for Finite Element Calculations
B E PERS, J KUOPPA, D HOLM

On the Fatigue Life Calculation Procedures Based on FEM and Design
Code Approaches
M J LEHTONEN

Optimum Design of Load-Carrying Cruciform Welded Joints Based on
the Fracture Mechanics Method
G S WANG, H SPENNARE

Guidelines for Optimum Design of Load-Carrying Fillet Welds under
Fatigue Loading
H SPENNARE, G S WANG, L LOPEZ MARTINEZ

End Pieces for Box Beams
G KYLBERG

Design Directions Bracing Supports
M LINDSTRÖM

Influence of Cutting Method and Material Static Strength on the
Fatigue Strength of Test Specimen
H TROGEN, K OLSSON, H SPENNARE

Fatigue Behaviour of Steels with Strength Levels Between 350 and
900 MPa – Influence of Post Weld Treatment under Spectrum Loading

L LOPEZ MARTINEZ, A F BLOM, H ROGEN, T DAHLE

Investigation of Residual Stresses in As-Welded and TIG-Dressed
Specimens Subjected to Static/Spectrum Loading
L LOPEZ MARTINEZ, R LIN, D WANG, A F BLOM

Weld Defects Before and After Post Weld Treatment for MAG and High-Productivity
MAG Welding
L LOPEZ MARTINEZ, A F BLOM, J SAMUELSSON

Swedish Contribution to IIW-Programme on Post Weld Treatment Evaluation

L LOPEZ MARTINEZ, S BODIN, A F BLOM, J SAMUELSSON

Fracture Mechanics Modelling of FCG in Welded Joints
G S WANG, A F BLOM, L LOPEZ MARTINEZ

Fatigue Tests and Fatigue Life Predictions of Spheroidal Graphite
Cast Iron
M BÄCKSTRÖM, A KÄHÖNEN

APPLICATIONS / CASE STUDIES

Structural Optimisation in Industrial Applications
D HOLM, M MACKALDENER, H HELLMAN

Development of a Straddle Carrier Wheel Support
A SILJANDER, A KÄHÖNEN, M LEHTONEN, J JUNTUNEN, P MÄNTYSAARI

Optimisation of Welded Component in Excavator Boom
P CARLGREN, P LIDSTRÖM, M MACKALDENER, D HOLM

Durability Assessments of Armoured Personnel Carrier Axle Housings

A SILJANDER, A KÄHÖNEN, M LEHTONEN, S NURMINEN, K LUNDAHL

Fatigue Behaviour of a Railway Component – Application of New Design
Criteria and TIG-Remelting Technique
T DAHLE

Structural Integrity Assessment of a Truck Trailer
M BÄCKSTRÖM, A KÄHÖNEN, S LIUKKONEN, R RÖNNSKOG, M BONDE