Placeholder

Fatigue 2000 – Fatigue & Durability Assessment of Materials, Components and Structures

€147.00

€10 p&p UK / €20 p&p Worldwide

Proceedings of the Fourth International Conference of the Engineering Integrity Society, held at Robinson College Cambridge, UK, April 10-12, 2000. Edited by M. R. Bache, P. A. Blackmore, J. Draper, J. H. Edwards, P. Roberts and J. R. Yates.
ISBN 1 901537 16 1 (2000). 600 pages.

Proceedings of the Fourth International Conference of the Engineering Integrity Society 10-12 April Cambridge, UK

HISTORICAL PERSPECTIVES

Blind Alleys on the Route to Real Fatigue Solutions: A Historical Perspective
K. J. MILLER

A Review of Fatigue Life Assessment Procedures for Aeroengine Fracture Critical Components

G. HARRISON

MATERIALS I

Stochastic Damage Accumulation in a Ferritic-Martensitic Steel During Fatigue
S. MEYER, E. DIEGELE, A. BRÜCKNER-FOIT and A. MÖSLANG

Titanium Alloys for High Performance Applications
W. J. EVANS and M. R. BACHE

Influence of Austempering Time on High Cycle Fatigue Strength of Austempered Ductile Cast Iron (ADI)
S. K. PUTATUNDA and N. CLARK

Fatigue Behaviour in a PM Ni-Base Superalloy Udimet 720
J. LUO and P. BOWEN

METAL MATRIX COMPOSITES

Influence of Density and Sintering Temperature on High Cycle Fatigue Behaviour of FL 4405 High Strength PM Steel
M. B. VOLLMERS and R. I. STEPHENS

Influence of Carbide and Inclusion Contents on the Fatigue Properties of High Speed Steels and Tool Steels
F. MEURLING, A. MELANDER, M. TIDESTEN and L. WESTIN

Modelling of In-Service Fatigue Performance of Particle Reinforced Aluminium Alloys
B. TABERIG, R. PIPPAN, M. BRUZZI, P. McHUGH, J. FOULQUIER, A. RAPOPORT, G. P. FEDRIGONI, P. M. POWELL, R. COOK, A. FORN, E. MARTIN, F. FRIORI and F. RUSTICHELLI

The Influence of Casting Defects on the Fatigue of SiCp/Al MMCs
H. YAMAURA, T. MA, D. A. KOSS, R. C. VOIGT and T. KIMURA

POLYMERS AND ELASTOMERS

Experimental Setup for the Bending Fatigue of Fibre-Reinforced Composite Materials
W. van PAEPEGEM and J. DEGRIECK

A Statistical Model for Evaluation of Random Fatigue Data
A. FERNÁNDEZ-CANTELI, M. LÓPEZ-AENLLE, M. J. LAMELA and E. CASTILLO

Adhesive Joints – a Challenge for Design
M. SCHMID

MATERIALS II

Fatigue Behaviour of 316 Grade Austenitic Stainless Steel Pipes at Elevated Temperature
C. M. BRANCO and R. F. MARTINS

The Impact of Salt Environments on the Fatigue Response of Structural Alloys
M. R. BACHE, W. J. EVANS, J. P. JONES and I. UYGUR

Probabilistic Fatigue Model for Powder-Metallurgy Nickel-Base Alloys
B. BRETHÈS, P. PERRUCHAUT and J. C. LAUTRIDOU

MODELLING

Modelling of Non-Stationary Variance in Vehicle Loading Histories for Fatigue Analysis
C. LESER, S. THANGJITHAM and N. E. DOWLING

Fatigue Life Modelling of Pressure Vessels
X. B. LIN

The Stress Intensity Factor Solution for a Flaw at a Notch Root
A. A. DABAYEH, J. C. THOMPSON and T. H. TOPPER

A Mesomechanical Model of Fatigue Crack Initiation and Growth with Application to the Low-Cycle Fatigue Life Prediction of the Cast Magnesium Alloy AZ91
H.-Z. DING, G. EISENMEIER and H. MUGHRABI

TMF & CREEP-FATIGUE INTERACTIONS

The Effect of Elevated Temperature Pre-Exposure on the Creep-Fatigue Crack Growth Behaviour of a Polycrystalline Nickel-Base Superalloy
D. W. HUNT, D. K SKELTON and D. M. KNOWLES

Thermoplastic Analysis of Inhomogeneous Rotating Disk with Variable Thickness
H. JAHED and S. SHERKATI

Detecting the Crack Initiation at Interdendritic Shrinkage Cavities in the Nickel-Base Superalloy MAR-M247LC During Thermal-Mechanical Fatigue
M. BECK, K.-H. KANG and D. LÖHE

The Effects of Stress Ratio and Dwell Loading on Short Fatigue Crack Growth in Titanium Alloy Ti6246
W. J. EVANS, J. P. JONES, M. R. BACHE, Y.-T. HYAN and S. WILLIAMS

STATISTICS

Probability Method of Fracture for Reactor Life Estimate
S.-J. CHANG

Comparison of the Uncertainty in a Predictive Fatigue Analysis and a Historical Data Analysis for an Aircraft Engine Component
K. LODEBY

The Application of Statistical Techniques to the Analysis of Fatigue Endurance Data
X. D. WU, R. A. COLLINS and M. R. JONES

Very Low Cycle Fatigue Assessment of a Transportable Military Bridge
S. CHEUNG and A. R. LUXMOORE

MULTI-AXIAL

Fatigue life Assessment of Components and Structures Under Multiaxial Service Loading
A. CARMET, B. WEBER and J. L. ROBERT

A Stress-Based Approach for Evaluating High-Cycle Fatigue Resistance Under Multiaxial Loading
M. de FREITAS, B. LI and J. L T. SANTOS

A New Energy-Based Multiaxial Fatigue Parameter: Part 1: Multiaxial Fatigue Life Assessment for Various In-Phase and Out-of-Phase Strain Paths
A. VARVANI-FARAHANI and T. H. TOPPER

A New Energy-Based Multiaxial Fatigue Parameter: Part 2: Biaxial Fatigue Crack Growth Rate and Life Prediction of SAE 1045 Steel Specimens Subjected to Various Biaxial Strain Ratios
A. VARVANI-FARAHANI and T. H. TOPPER

TEST METHODS

Testing and Analysis of Window Details in Passenger Ships
M. BÄCKSTRÖM, T. P. J. MIKKOLA, G. MARQUIS and O. ORTMANS

Vibration Control of Multi-DOF Excitation Systems Using Modern Control Theory
Y. YAMAUCHI, Y. UCHIYAMA, K. UENO and M. FUJITA

Fatigue Limit Estimates Based on Stair-Case Tests
T. SVENSSON and J de MARÉ

ROLLING CONTACT

Establishing a Qualitative Model for Rolling Contact Fatigue and Spalling Failure of Back-Up Rolls
M. F. FROLISH and J. H BEYNON

Interior Fatigue in Gear Teeth
M. MACKALDENER and M. OLSSON

A Mechanism for Contact Fatigue
B. ALFRESSON and M. OLSSON

Deformation and Lifetime Behaviour of a Cyclically Loaded Wheel Steel
B. DENNE, K.-H. LANG and D. LÖHE

LIFE PREDICTION

A Systematic Study for Fatigue Life Prediction of Grey Cast Iron Disc Brakes
B. GÜNTER and H. KLINGELHOEFFER

Fatigue Life Prediction of Aircraft Landing Gear Based on Multibody System Simulation and the Local Strain Approach
H. NIE, W. KORTÜM, W. KRÜGER and M. SPIECK

Fatigue Life of an Aluminium High-Speed Ship Detail
B. A. de VRIES, B. BOON and J.H. VINK

MECHANISMS

Methodology for Modelling the Short Crack Fatigue Behaviour of Al-SiC MMs
M. S. BRUZZI and P. E. McHUGH

Fatigue Load Evaluations of Aircraft Landing Gear Based on Dynamic Analysis in Frequency Domain
H. NIE

Estimation of Crack Opening Stresses from Strain-Life Fatigue Data
M. KHALIL, T. LAM and T. H. TOPPER

K Solutions for Semi-Elliptical Weld Toe Cracks in T-Butt Joints
M. M. K. LEE and D. BOWNESS

MANUFACTURING I

The Effects of Drawing Strain on Fatigue Behaviour of 304 Stainless Steel Wires
M. TOPIC, C. ALLEN and A. BALL

Influence of Manufacturing and Loading Parameters on the Fatigue Limit of a Blade/Disc Assembly Using Stair-Case and Locati’s Method
C. G. DIAGNE, G. THAUVIN, Z. AZARI and G. PLUVINAGE

Nitriding Against Fatigue
J. L. OVERBEEKE and H. T. M. van LIPZIG

Effects of Cutting Method on the Fatigue Strength of High Strength Sheet Steels
F. MEURLING, A. MELANDER, J. LINDER and M. LARSSON

CASE STUDIES I

Routes to Damage Tolerance and Life Extension in Helicopters and Other High-Strength High-Integrity Mechanisms
P. E. IRVING and R. A. HUDSON

Case Histories of Fatigue in Oil and Gas Process Pipework
J. P. GRAHAM

MANUFACTURING II

Fatigue Life Improvement due to Cold Expansion in Al 2650 at 20°C and 150°C
V. D. LACARAC, D. J. SMITH and M. J. PAVIER

The Effect of Repair Welds on the High-Temperature Low-Cycle Fatigue Life of the Nickel Base Superalloy IN738LC
M. ANTILL and D. J. SMITH

CASE STUDIES II

A Fatal Accident Caused by Aeolian Vibration-Induced Fatigue of an ACSR Distribution Line
A. A. JOHNSON

Local Approach Analysis of the Fatigue Performance of Aluminium Alloy Fastener Joints
G. SHATIL and R. M. SMITH

The Stamina of Non-Gasketed, Flanged Pipe Connections
M. ABID, D. H. NASH and J. WEBJORN

THE FUTURE FOR FATIGUE

Fatigue Beyond 2000 – a Gas Turbine Viewpoint
W. J. EVANS and G. F. HARRISON